# Bill of Material Mass Change Report (BOM.R5)
Read Time: 1 minute(s)
Form Details
Form Details
Purpose
The BOM.R5 procedure is used to create a report of the items that will be affected if a mass change update ( BOM.P3 ) were to be performed using the same parameters.
The procedure determines which bills of material to list based on the part number and/or reference designator you specify. You may also limit the items selected by specifying a pre-defined save-list of the eligible bill of material IDs. The procedure searches the line items of each bill of material on file, or in the save-list specified, for a match on the part number and/or reference designator.
Frequency of Use
As required.
Prerequisites
None.
Data Fields
BOM.ID The part number that identifies the bill of material.
Description The first line of the description from the Parts file.
Li# The line item number that was found matching the specifications.
Part Number The part number of the component.
Description The first line of the description for the associated part
number.
Code One of the following four codes defining the part. C - Component part
A - Assembly P - Phantom assembly L - Line
Quantity The quantity required of the part to make one unit of the
assembly defined by the bill of material.
Unit Meas The unit of measure associated to the quantity.
Start Eff The date on which the associated part will become effective for
use.
End Eff The date on which the associated part is no longer in effect.
Reference Designator Reference designator information for the associated
part number.