# T-UNLOAD
Updated: 10/19/2020, 10:24:56 AM
Created: 10/19/2020, 10:24:56 AM
Last Updated By: Daniel Klein
Read Time: 1 minute(s)
# Description
The T-UNLOAD command requests the tape device to rewind and unload the media. The command has the general form:
T-UNLOAD {CHANNEL=channel}
1
where channel is the specific channel attachment (0-9).
# Note
Some tape devices do not support the unload command. In these cases the usual action is to rewind the tape device.
An example of use may be as:
T-UNLOAD
1
to request the tape device to rewind and unload.
Back to Tape Commands